Key Advantages

-1.5-Ton Rated Lifting Capacity
Designed with a rated capacity of 1.5 tons for handling suitable loads within its working load limit. This makes it a practical manual lifting tool for equipment installation, machinery maintenance, and controlled load positioning when used with properly rated lifting points and accessories.

-Manual Lever Operation Without Electricity
The lever-operated mechanism allows users to lift or lower loads through repeated hand movements without requiring an electrical power supply. It is useful for maintenance areas, construction sites, and installation work where powered lifting equipment may be inconvenient.

-1.5-Metre Lifting Range for Controlled Adjustment
The specified 1.5-metre lift provides a practical working range for suitable lifting and positioning tasks. It supports controlled changes in load height during installation, alignment, and maintenance, subject to adequate clearance and the manufacturer's operating instructions.

-Ratchet and Chain Mechanism for Incremental Movement
The lever-and-chain mechanism allows the operator to move a load in controlled increments. This is particularly useful when adjusting the position of machinery or components that require gradual movement rather than a single large lift.

-Compact Hand-Operated Solution for Site Work
A lever hoist can be used in suitable work areas without a powered lifting system, provided secure rated anchor points and sufficient operating space are available. Its manually operated design makes it useful for industrial maintenance, mechanical installation, and construction tasks.

Broad Range of Applications
-Industrial Equipment Installation, Machinery Maintenance, Workshop Repairs, Factory Maintenance, Steel Structure Installation, Mechanical Assembly, Equipment Alignment, Load Positioning, Construction Site Work, Engineering Maintenance, Warehouse Equipment Maintenance, Controlled Lifting, Suitable Load Pulling and Tensioning Where Permitted by the Manufacturer


核心优点

-1.5吨额定起重量，适合工业吊装工作
额定起重量为1.5吨，可在规定工作载荷范围内处理适合的重物。配合符合载荷要求的吊点及吊装配件，可用于设备安装、机械维修及受控重物定位等工作。

-手扳杠杆操作，无需电力驱动
通过反复扳动操作手柄进行手动提升或下降，不需要连接电源。适合电动起重设备使用不便的维修场所、建筑工地及设备安装环境。

-1.5米提升行程，方便调整重物高度
标示1.5米提升行程，可用于适合的短行程提升及定位工作。在具备足够作业空间的情况下，方便安装人员逐步调整设备或零件高度，辅助机械装配与维修。

-棘轮链条机构，方便逐步控制移动
通过手扳杠杆与链条机构配合，可逐步移动负载，方便进行较细致的位置调整。特别适合需要分阶段提升、下降或校正位置的机械安装工作。

-手动起重设计，适合多种现场作业
在具备可靠额定吊点及足够操作空间的条件下，无需依赖固定式电动起重系统即可进行适当的手动起重作业。适用于工业维护、机械安装及工程施工等多种场景。

适用范围广阔
-工业设备安装、机械维修、车间维修、工厂设备保养、钢结构安装、机械装配、设备校正、重物定位、建筑工地作业、工程维护、仓库设备维护、受控重物提升，以及制造商允许的适当拉紧与牵引工作